Roofing Contractor in Miramar, FL | Roof Replacement & Repair
Lakefront homes with concrete tile roofs in Miramar, Florida
Home › Service Areas › Miramar
MIRAMAR, FLORIDA · BROWARD COUNTY

Roofing contractor in Miramar.

Based next door in Pembroke Pines and working on Broward property since 2006. We handle the Miramar permit, the HOA submittal and the inspections — you deal with one coordinator.

✓ Permits & HOA handled ✓ Free drone inspection ✓ 10-yr workmanship warranty
GET A FREE INSPECTION ✆ (954) 665-3231

Get a Miramar quote

Free inspection and a written itemised estimate. No obligation.

By submitting this form, you agree to be contacted by SafeTech Roofing and Windows and its authorized representatives via phone, text, or email using automated technology. Consent is not a condition of purchase. Message and data rates may apply. Reply STOP to opt out.

or

✆ CALL (954) 665-3231

Licensed & insured · BBB Accredited · Verify us

✔ Licensed & insured — verify on DBPR
◈ BBB Accredited
⛨ On Broward property since 2006
★★★★★ 5.0 · Verified on Google
CGC #1537934 · CCC #1336954
MIRAMAR · 2026 Shingle $13,750 – $23,750 · Tile $25,000 – $55,000 · Metal $31,250 – $62,500 on a 2,500 sq ft roof
FULL BREAKDOWN

WHAT WE DO IN MIRAMAR

Eight services, one licence, one coordinator

Roof replacement →

Tile, shingle or metal. Tear-off to the deck, failed plywood replaced, new underlayment, 10-year workmanship warranty.

Roof leak repair →

We trace the leak to where water actually enters, which is rarely where the stain is. 1-year workmanship warranty on the area repaired.

Emergency roof repair →

Same day or within 24 hours depending on call time. Temporary weatherproofing plus photographs for your insurer.

Tile roofing →

Common on tile-approved South Florida communities. Underlayment renewal keeps your existing tiles and the HOA-approved colour.

Shingle roofing →

Architectural shingle to TAS-107 for 110–150+ mph wind, installed on six-nail patterns.

Metal roofing →

Standing seam with a valid Miami-Dade NOA and 24-to-26 gauge metal. Ask any contractor to show you the NOA number.

Free roof inspection →

Drone survey where conditions allow, so you see your own roof before anyone quotes on it — and have a dated record for a claim.

Hurricane impact windows →

Roughly $800–$1,400 per window, or $10,000–$25,000 whole home. PGT, CGI, Tecnoglass, EAS, CWS, ECO and EMC.

WHY LOCAL MATTERS HERE

Two things slow a Miramar roof down. Neither is the roof.

The first is the permit. Miramar sits in Broward County's High Velocity Hurricane Zone, so the inspection requirements are stricter than most of the state and the paperwork has to be right the first time.

The second is the HOA. Most communities here run an architectural review with an approved list of tile profiles and colours. A submittal that misses the list comes back, and the job waits. We prepare that package — colour and profile selection included — because we've done it in these neighborhoods before.

HVHZ code, in plain terms

Shingles to TAS-107 (110–150+ mph) with six-nail patterns · tile needs structural load engineering and two-ply or peel-and-stick underlayment · metal needs a valid Miami-Dade NOA and 24-to-26 gauge · decking min 19/32in at 6in on-center · testing per TAS-105 or TAS-106.

Permits are itemised, not sprung on you

Broward municipal permit fees run on a value scale, roughly 1–2% of the contract — about $500–$1,500 on a typical re-roof. It's a line in your written estimate before you sign.

We're next door

Based in Pembroke Pines, Florida 33028 — minutes from Miramar. We live under the same storms you do, and we're not driving in from out of state after a hurricane and leaving when the work dries up.

NEIGHBORHOODS WE WORK IN

Across Miramar's ZIP codes

33023 · 33025 · 33027 · 33029

Monarch Lakes Sunset Lakes Riviera Isles Silver Shores Miramar Isles Huntington Vizcaya Country Club Ranches Sunset Falls Historic Miramar

Not listed? We still cover you — call and ask. We work throughout Miramar and across Broward, Miami-Dade and Palm Beach.

ROOFS ACROSS MIRAMAR

The three systems you'll see on Miramar streets

Concrete tile dominates the planned communities, with standing-seam metal increasingly common on re-roofs. We install and repair both — plus architectural shingle.

SEE OUR WORK →
Single-family home with a flat concrete tile roof in Miramar, Florida

Flat concrete tile

The most common roof in Miramar's planned communities, and usually the one the HOA has approved colours for.

Single-story home with a terracotta concrete tile roof in Miramar, Florida

Terracotta S-tile

Needs structural load engineering and two-ply or peel-and-stick underlayment under Broward code.

Close view of a barrel tile roof ridge and hip detail on a South Florida home

Barrel tile detail

Ridges and hips are where tile roofs fail first — the mortar and the underlayment beneath them.

Dark standing-seam metal roof on a single-story home in Miramar, Florida

Dark standing seam

Metal needs a valid Miami-Dade NOA and 24-to-26 gauge metal. Ask any contractor for the NOA number.

Two-story home with a tan standing-seam metal roof in Miramar, Florida

Tan standing seam

Lighter colours reflect more heat — worth weighing against what your HOA will approve.

Two-story stucco home with a flat concrete tile roof and three-car garage in Miramar, Florida

Two-story homes, two roof levels

Where a lower roof meets an upper wall, the step and wall flashing is the waterproofing. It's the first place we look on a two-story tile roof.

Street of two-story tile-roofed homes in a Miramar, Florida community

HOA streets, matched roofs

Many Miramar communities set the tile profile and colour for every home on the street. We confirm the approved range and prepare the submittal.

Two-story home with a light concrete tile roof and hip ridges in Miramar, Florida

Hips and ridges

Every hip and ridge is set and pointed on site — the lines that take the most wind on a tile roof.

Single-story tile-roofed home with a fenced lakefront yard in Miramar, Florida

Single-story tile homes

Low, wide tile roofs over garage and living wings — the most common re-roof we quote in western Broward.

Concrete tile gable roof over a two-car garage in Miramar, Florida

The garage gable

Gable ends take wind-driven rain side-on. Rake tile and edge metal have to be fixed to code, not just bedded.

Row of tile-roofed homes along a lake in Miramar, Florida under summer storm clouds

Lakefront, open to the wind

Homes backing onto Miramar's lakes have nothing to break the wind across the water. Attachment and uplift testing matter more here.

Lake and tile-roofed homes at dusk in a Miramar, Florida neighborhood

Built around water

Much of Miramar was laid out around retention lakes, so many roofs face open water on one side.

ROOFING COSTS

What a new roof costs in Miramar in 2026

Real ranges by material, with the code requirements that drive the price. Totals assume a 2,500 sq ft roof — larger roofs, steeper pitches and complex rooflines cost more.

Material / task Unit cost Est. total · 2,500 sq ft Broward HVHZ requirement
Architectural shingles $5.50 – $9.50 / sq ft $13,750 – $23,750 Must meet TAS-107 (110–150+ mph wind) and require 6-nail patterns per shingle.
Concrete / clay tile $10.00 – $22.00 / sq ft $25,000 – $55,000 Requires structural load engineering and two-ply or peel-and-stick underlayment.
Metal (standing seam) $12.50 – $25.00 / sq ft $31,250 – $62,500 Must have valid Miami-Dade NOA paperwork; minimum 24–26 gauge metal.
Permitting fees Municipal value scale $500 – $1,500 Roughly 1–2% of contract value. We pull the permits.
Plywood decking (CDX) $75 – $125 / sheet installed $1,875 – $4,375 Minimum 19/32in; nailed 6in on-center at panel edges. Typically 25–35 sheets.
Uplift / pull testing $350 – $850 per inspection $350 – $850 TAS-105 fastener withdrawal or TAS-106 tile mechanical pull test.

Why this isn't a quote: final cost depends on roof size, pitch, layers to be torn off, decking condition, permit jurisdiction and final scope. Decking replacement and uplift testing are code-driven and can only be confirmed once the old roof is off. We give you a firm written number after a free inspection — and we tell you up front which line items could move.

Want the real number for your Miramar roof?

FREE INSPECTION & WRITTEN ESTIMATE →

OUR PROCESS

A clear process from estimate to final walkthrough

1

Consultation

We learn whether you need roofing, windows, doors, or a combined project.

2

Inspection

We review roof condition and opening needs, then document visible concerns.

3

Options

We explain materials, impact products, financing, and permit considerations.

4

Installation

The approved roofing or impact window scope is completed, run by a SafeTech project coordinator.

5

Walkthrough

We inspect the finished work ourselves, then walk it with you and answer final questions.

ROOFING PERMITS & HOA

Requirements in Miramar

Re-roofing in South Florida isn't just about protecting your home — it's about doing it the right way. Permits, inspections and HOA approvals are often required so your roof replacement meets local codes and community standards.

Exact requirements depend on the City of Miramar building department and on your HOA's own rules. We confirm both for your address before work starts.

RE-ROOF PERMITS

Most re-roof projects require a building permit from your local municipality. We handle the permit application and make sure your project meets the current Florida Building Code.

INSPECTION REQUIREMENTS

Inspections verify your roof meets safety and wind-load standards. We schedule and coordinate every required inspection.

HOA APPROVALS

Many communities require HOA approval for a roof replacement. We prepare the documentation, including tile or shingle colour and profile, to support your approval.

SAFETECH PERMIT ASSISTANCE

We manage the paperwork, submissions and follow-ups, so you can focus on your home and family.

ROOFING RESOURCES

Guides on insurance, financing, costs and permits, written by a licensed South Florida contractor.

SEE ALL ROOFING GUIDES →

SAFE APPROVALS. CODE COMPLIANT. BUILT TO LAST.

SafeTech handles the details — so your project stays on track.

BOOK A FREE INSPECTION

WHAT HOMEOWNERS SAY

5.0 on Google, in their words.

5.0 ★★★★★ Verified on Google →
★★★★★

"We had been putting off getting our roof taken care of for a while. Glad we finally did it. The process was simple, communication was good, and we’re very happy with the results."

Roof replacement
★★★★★

"We’ve already had a couple of heavy rainstorms and there were no leaks or issues — just a solid, tight roof."

Completed roof project
★★★★★

"SafeTech did a great job on our tile roof replacement. They helped with submitting documents to the HOA, color selection, and handled all the permits with the city."

Roof replacement · HOA & permits handled

WHAT BACKS THE WORK

10 years

Workmanship warranty on full roof replacements.

1 year

Workmanship warranty on repairs, covering the specific area repaired.

Limited lifetime

Manufacturer material coverage, where the manufacturer offers it.

$30,000

Contractor Directorii deposit protection, included on every registered project. Optional $250,000 full coverage for 2.5% of the contract.

Materials installed: GAF · Owens Corning · CertainTeed · Malarkey · IKO · Westlake Royal Building Products · Eagle Roofing Products · Crown Roof Tiles · Polyglass · Carlisle · Johns Manville

FINANCING

You don't have to pay for it all up front.

A roof is rarely a planned purchase. We offer affiliated company financing, plus PACE financing through Home Run Financing and RenewPACE, so the decision is about the right roof rather than what's in the account this month.

✔

Affiliated company financing — arranged through our affiliated finance company. PACE also available through Home Run Financing and RenewPACE.

✔

Terms in writing — your rate, payment schedule, and total cost are disclosed in writing before you sign.

✔

Ask at your inspection — we review financing alongside your estimate.

SEE FINANCING OPTIONS

MIRAMAR QUESTIONS

The eight we get asked most

If yours isn't here, call and ask.

✆ (954) 665-3231

Do you pull the permit with the City of Miramar?

Yes. We pull the municipal roofing permit and handle the inspections that go with it. Permit fees in Broward County are calculated on a municipal value scale, roughly 1–2% of the contract value, which works out around $500–$1,500 on a typical residential re-roof. That figure is itemised in your written estimate rather than added later.

Will you deal with my HOA?

Yes. Most Miramar communities — Monarch Lakes, Sunset Lakes, Riviera Isles, Silver Shores and others — have an architectural review process with approved tile profiles and colours. We prepare the submittal package including the colour and profile selection, and we have done it enough times to know what each board asks for.

What does a new roof cost in Miramar?

On a 2,500 sq ft roof: architectural shingle runs $5.50–$9.50 per sq ft, or about $13,750–$23,750. Concrete and clay tile runs $10.00–$22.00 per sq ft, or about $25,000–$55,000. Standing seam metal runs $12.50–$25.00 per sq ft, or about $31,250–$62,500. Permitting adds roughly $500–$1,500, plywood decking $75–$125 per sheet installed, and uplift or pull testing $350–$850 per inspection.

How fast can you get to a leak in Miramar?

Same day or within 24 hours depending on what time you call. We are based next door in Pembroke Pines, a short drive from anywhere in Miramar — we are not driving in from out of state after a storm.

Do I need a full replacement or will a repair hold?

It depends on what the underlayment and decking look like, which we can only confirm once the roof is opened up. If the roof has years left we will tell you a repair is the right answer. Repairs carry a 1-year workmanship warranty covering the specific area repaired; full replacements carry 10 years.

What are the code requirements for a roof in Miramar?

Miramar is in Broward County's High Velocity Hurricane Zone. Shingles must meet TAS-107 for 110–150+ mph wind and go down with six-nail patterns. Tile needs structural load engineering plus two-ply or peel-and-stick underlayment. Metal needs a valid Miami-Dade NOA and 24-to-26 gauge metal. Decking must be a minimum 19/32in, nailed 6in on-center at panel edges. Testing is per TAS-105 for fastener withdrawal or TAS-106 for tile pull.

Can you help with my insurance claim?

We inspect your roof, document the condition with photographs, and give you a written report and estimate you can submit to your insurer. We are licensed roofing contractors, not public adjusters, so we do not negotiate your claim or advise on your policy.

Do you offer financing?

Yes. SafeTech Roofing and Windows offers affiliated company financing, plus PACE financing through Home Run Financing and RenewPACE. Terms depend on the project and approval, and every term is disclosed in writing before you sign. Ask about it during your free inspection.

SERVICE AREA

Roofing in Miramar and across Broward County

Based in Pembroke Pines, Florida 33028, serving Broward, Miami-Dade and Palm Beach. Free inspection and written estimate anywhere in the service area.

CITIES WE SERVE

Roofing in Pembroke Pines Miramar Roofing in Sunrise Roofing in Hollywood Roofing in Cooper City Roofing in Davie Roofing in Fort Lauderdale Roofing in Plantation Roofing in Coral Springs Roofing in Parkland Roofing in Margate Roofing in Tamarac ALL SERVICE AREAS →

Book a free Miramar roof inspection.

Drone survey where conditions allow, photographs of anything we find, and a written itemised estimate. Permits and HOA handled.

GET A FREE INSPECTION ✆ (954) 665-3231
✆ Call now Free inspection