Tile, shingle or metal. Tear-off to the deck, failed plywood replaced, new underlayment, 10-year workmanship warranty.
We trace the leak to where water actually enters, which is rarely where the stain is. 1-year workmanship warranty on the area repaired.
Same day or within 24 hours depending on call time. Temporary weatherproofing plus photographs for your insurer.
Common on tile-approved South Florida communities. Underlayment renewal keeps your existing tiles and the HOA-approved color.
architectural shingle to TAS-107 for 110–150+ mph wind, installed on six-nail patterns.
Standing seam with a valid Miami-Dade NOA and 24-to-26 gauge metal. Ask any contractor to show you the NOA number.
Drone survey where conditions allow, so you see your own roof before anyone quotes on it.
Roughly $800–$1,400 per window, or $10,000–$25,000 whole home. PGT, CGI, Tecnoglass, EAS, CWS, ECO and EMC.
Much of Tamarac was built out between the 1970s and the 1990s, and a large share of homes sit inside HOA, condominium or 55+ communities. Both of those shape the job.
On a tile roof the underlayment is the waterproofing, and it wears out long before the tile does. Plenty of Tamarac roofs are at that point now, tiles still on, membrane failing underneath.
Most Tamarac communities have architectural review. We confirm the approved tile profile and color, prepare the submittal, then pull the permit with the City of Tamarac Building Department.
Based next door in Pembroke Pines, Florida 33028. Emergency calls answered same day or within 24 hours, depending on when you call.
33319 · 33321 · 33351
Not listed? We still cover you, call and ask. We work throughout Tamarac and across Broward County.
This two-story Tamarac home had a flat concrete tile roof showing its age: broken and slipped tiles, a rusted roof vent and an open valley. We replaced it with a new barrel tile roof. These are our own photographs from the job; house numbers have been removed for the homeowner's privacy.
BEFORE
AFTER
Full tile replacement · 10-year workmanship warranty · the manufacturer's own warranty, with the document provided for each product
SEE TILE ROOFING →Real ranges by material, with the code requirements that drive the price. Totals assume a 2,500 sq ft roof. Larger roofs, steeper pitches and complex rooflines cost more.
| Material / task | Unit cost | Est. Total · 2,500 sq ft | Broward HVHZ requirement |
|---|---|---|---|
| Architectural shingles | $5.50 – $9.50 / sq ft | $13,750 – $23,750 | Rated to meet this zone’s wind loads with the required nail pattern. |
| Concrete / clay tile | $11.00 – $22.00 / sq ft | $27,500 – $55,000 | Requires structural load engineering and two-ply or peel-and-stick underlayment. |
| Metal (standing seam) | $12.50 – $25.00 / sq ft | $31,250 – $62,500 | Miami-Dade or Florida product approval covering panel, clip, fastener and underlayment; 24–26 gauge metal. |
| Permitting fees | Municipal value scale | $500 – $1,500 | Roughly 1–2% of contract value. We pull the permits. |
| Plywood decking (CDX) | $75 – $125 / sheet installed | $1,875 – $4,375 | Minimum 19/32in. Typically 25–35 sheets on a 2,500 sq ft roof. |
| Uplift / pull testing | $350 – $850 per inspection | $350 – $850 | Fastener withdrawal or tile mechanical pull test where the code requires it. |
Why this isn’t a quote: final cost depends on roof size, pitch, layers to be torn off, decking condition, permit jurisdiction and final scope. Decking replacement and uplift testing are code-driven and can only be confirmed once the old roof is off. We give you a firm written number after a free inspection, and we tell you up front which line items could move.
Want the real number for your Tamarac roof?
FREE INSPECTION & WRITTEN ESTIMATE →We learn whether you need roofing, windows, doors, or a combined project.
We review roof condition and opening needs, then document visible concerns.
We explain materials, impact products, financing, and permit considerations.
The approved roofing or impact window scope is completed, run by a SafeTech project coordinator.
We inspect the finished work ourselves, then walk it with you and answer final questions.
Re-roofing in South Florida isn't just about protecting your home, it's about doing it the right way. Permits, inspections and HOA approvals are often required so your roof replacement meets local codes and community standards.
Exact requirements depend on the City of Tamarac building department and on your HOA's own rules. We confirm both for your address before work starts.
Most re-roof projects require a building permit from your local municipality. We handle the permit application and make sure your project meets the current Florida Building Code.
Inspections verify your roof meets safety and wind-load standards. We schedule and coordinate every required inspection.
Many communities require HOA approval for a roof replacement. We prepare the documentation, including tile or shingle color and profile, to support your approval.
We manage the paperwork, submissions and follow-ups, so you can focus on your home and family.
Guides on insurance, financing, costs and permits, written by a licensed South Florida contractor.
SEE ALL ROOFING GUIDES →SAFE APPROVALS. CODE COMPLIANT. BUILT TO LAST.
SafeTech handles the details, so your project stays on track.
"We had been putting off getting our roof taken care of for a while. Glad we finally did it. The process was simple, communication was good, and we’re very happy with the results."
Roof replacement"We’ve already had a couple of heavy rainstorms and there were no leaks or issues, just a solid, tight roof."
Completed roof project"SafeTech did a great job on our tile roof replacement. They helped with submitting documents to the HOA, color selection, and handled all the permits with the city."
Roof replacement · HOA & permits handledWorkmanship warranty on full roof replacements.
Workmanship warranty on repairs, covering the specific area repaired.
Manufacturer material coverage, where the manufacturer offers it.
Contractor Directorii deposit protection, included on every registered project. Optional $250,000 full coverage for 2.5% of the contract.
Materials installed: GAF · Owens Corning · CertainTeed · Malarkey · IKO · Westlake Royal Building Products · Eagle Roofing Products · Crown Roof Tiles · Polyglass · Carlisle · Johns Manville
A roof is rarely a planned purchase. In-house financing is available, subject to approval. PACE financing is also available through Home Run Financing and RenewPACE. The decision is about the right roof, not what's in the account this month.
In-house financing, subject to approval, with every term in writing before you sign. PACE also available through Home Run Financing and RenewPACE.
Terms in writing, your rate, payment schedule, and total cost are disclosed in writing before you sign.
Ask at your inspection, we review financing alongside your estimate.
Yes. We pull the municipal roofing permit and handle the inspections that go with it. Permit fees in Broward County are calculated on a municipal value scale, roughly 1–2% of the contract value, which works out around $500–$1,500 on a typical residential re-roof. That figure is itemized in your written estimate rather than added later.
Yes. Many Tamarac communities, including 55+ and condominium associations, have an architectural review process with approved tile profiles and colors. We prepare the submittal package including the color and profile selection, and we have done it enough times to know what each board asks for.
On a 2,500 sq ft roof: architectural shingle runs $5.50–$9.50 per sq ft, or about $13,750–$23,750. Concrete and clay tile runs $11.00–$22.00 per sq ft, or about $27,500–$55,000. Standing seam metal runs $12.50–$25.00 per sq ft, or about $31,250–$62,500. Permitting adds $500–$1,500, plywood decking $75–$125 per sheet installed, and uplift or pull testing $350–$850 per inspection.
Same day or within 24 hours depending on what time you call. We are based next door in Pembroke Pines, a short drive from anywhere in Tamarac, we are not driving in from out of state after a storm.
It depends on what the underlayment and decking look like, which we can only confirm once the roof is opened up. If the roof has years left we will tell you a repair is the right answer. Repairs carry a 1-year workmanship warranty covering the specific area repaired; full replacements carry 10 years.
Tamarac is in Broward County's High Velocity Hurricane Zone. Shingles must meet TAS-107 for 110–150+ mph wind and go down with six-nail patterns. Tile needs structural load engineering plus two-ply or peel-and-stick underlayment. Metal needs a valid Miami-Dade NOA and 24-to-26 gauge metal. Decking must be a minimum 19/32in, nailed 6in on-center at panel edges. Testing is per TAS-105 for fastener withdrawal or TAS-106 for tile pull.
In-house financing available, subject to approval. Terms in writing before you sign. PACE financing is also available through Home Run Financing and RenewPACE.
Based in Pembroke Pines, Florida 33028, serving Broward, Miami-Dade and Palm Beach. Free inspection and written estimate anywhere in the service area.
Drone survey where conditions allow, photographs of anything we find, and a written itemized estimate. Permits and HOA handled.